|
Jumper Settings for HPI-3000
with Versatility S1 Firmware 961117-1
This firmware has the
following capabilities:
- Narrow carriage dot matrix (Epson protocol)
- Wide carriage dot matrix (Epson protocol)
- LaserJet (HP PCL protocol)
- Options LaserJet algorithms:
HPI-3000 Standard form-feed algorithm
HPI-3000 Smart form-feed suppression algorithm
HPI-3000 Landscape (rotated) text algorithm
The three jumpers in the HPI-3000 are used to configure the unit's
capabilities as follows:
|
Configuration
|
Left Jumper
|
Middle Jumper
|
Right Jumper
|
| Epson - narrow (8") |
Open |
Open |
Open |
| Epson - wide (13") |
Open |
Open |
Installed |
| LaserJet |
Installed |
See form feed below |
Open |
| LaserJet with Landscaped Text |
Installed |
See form feed below |
Installed |
| Normal Form Feed (with LaserJet) |
|
Open |
|
| Smart Form Feed Suppression (with LaserJet)* |
|
Installed |
|
* Smart Form Feed Suppression eliminates the blank page which is
ejected by a laser
printer between two successive screen prints. A blank page may still
be ejected at
other times, since the HPI-3000 can't detect the buffer status of the
laser printer, and
passes all other form feed commands from the Universal Station to the
printer.
|
|
