|
|
|
|
|
Flat-Panel Display
for Honeywell UxS Stations
- Easy installation
- Low maintenance
- Bright display, low glare |
APPLICATION:
UxS Station with TPDG or TPDGX
Order FP-3000XTS with touch
Order FP-3000X without touch |
|
|
|
Data Sheet
A high quality replacement ...
This second generation LCD flat-panel display was designed as a direct
replacement for the CRT-based monitors used in Honeywell's UxS.
It is available in the bezel mount shown above, or as a tray mount similar
to the old CRT. The bezel mount, preferred by most customers, brings
the display forward in the bezel, resulting in a clean, updated look and
an easy reach for the operator. It requires removal and return of
the old bezel, and installation of the new bezel (supplied with the
display attached). The tray mount option (additional cost)
gives a fast installation. The display is shipped with brackets to
mount to the existing tray, with flat bezel inserts to match the new
flat display. The resulting installation puts the display about 5 cm
back from the front of the bezel.
Includes flat touch screen ...
The FP-3000Xts comes with an integrated flat
touch screen, mounted to the front of the display. This touch screen is mounted
within a few millimeters of the display surface, eliminating the "false
pick" problem that can occur when the touch screen beams are farther from the display
surface. This touch screen is connected to the existing touch screen cable. Since
it is mounted to the front of the display, no alignment procedure is required.
If you application does not require a touch screen, specify the FP-3000X
when ordering.
A bright, durable display ...
The delicate LCD plastic surface is protected by a glass anti-glare
panel attached to the front of the display. This durable surface protects the LCD
from the wear scratches that any plastic surface eventually suffers after repeated
cleaning (or touching with dirty fingers, pencils, or sharp objects). The
anti-glare treatment of the glass combined with the inherent low-glare characteristics of
a flat display results in a high-contrast display that is easy on the eyes.
Low maintenance, long life ...
The solid-state design of the flat-panel TFT LCD display provides
inherent reliability, low power consumption, and low maintenance.
Aside from
periodic cleaning of the anti-glare glass, the FP-3000X requires no regular periodic
maintenance. Technicians have access to a full range of digital display adjustments
during setup. This adjustment can be frozen to prevent subsequent
adjustment by unplugging the adjustment cable from the display after
setup.
Contact us for price ...
|
|
